Eaton easy500, easy700, Operating Instructions Manual, Page: 84 / 240

4 Wiring  with
4.3 Function Relays
80
Operating instructions 05/10 MN05013003Z-EN www.eaton.com
▶ Press the OK button.
▶ Press the
í
button.
▶ Use the Í Ú ú í buttons to enter the value 01.000 .
▶ Confirm with OK .
The time setpoint
I1
for the pause time is 1 s
▶ Use the Ú button to enter the value of the second setpoint value I2.
▶ Set this value to 0.5 s.
This is the time value for the pulse time.
▶ Press ESC to leave the parameter entry.
The values are now stored.
▶ Complete the circuit diagram.
▶ Press the ESC button.
▶ Press OK to store the circuit diagram.
▶ Test the circuit diagram with the power flow display.
▶ Switch easy to RUN mode and return to the circuit diagram.
Each parameter set can be displayed using the power flow display for the
circuit diagram.
▶ Move the cursor onto
C1
and press OK .
The parameter set for the counter is displayed with actual and setpoint
values.
▶ Switch I5. The actual value changes.
This is represented in the easy parameter display. In the last line C: 0007
the counter actual value is = 7.
If the actual value is greater than or equal to the setpoint (10), the left
character on the bottom row will change to
â
. The contact of counter
C1
switches.
The counter contact triggers the timing relay. This causes the warning light
to flash at output Q1.
T1
Ü
S +
I1 0 0.000
I2 +0
T:
T1
Ü
S +
I1 01,000
I2 +0
T:
T1
Ü
S +
I1 01,000
I2 00.50
T:
I5-------CC1
I6-------RC1
C1-------TT1
T1-------
Ä
Q1
SAVE
CANCEL
C1 N +
S 0010
#
C:0000
C1 N +
S 0010
#
C:0007
C1 N +
S 0010
â
C:0010