DOCUMENT 1218
REV. B
Instruction Manual
AGS-LED
312 LED Series
300mm and 400mm
23
10.5.7
Verifying Jumper Settings
a.
The jumper setting depends on the size (height and length) and number of illuminated faces
(single or double).
b.
The jumper(s) must be placed in the right location(s) for the specific sign. Some signs require
more than one power supply.
c.
The jumpers of each power supply are set depending on the size of the LED strip its
powering. See
Tables 10 - 16, pgs. 80, 81, 82, 84, 86, 88, and 89
for the proper settings.
10.6
Replacing LED Strip Assemblies
Contact Crouse-Hinds Airport Lighting for replacement LED Strip Assemblies. See
Figure 27,
pg. 54,
for LED Array Wiring. See
Figures 53-57,59, 61 & 62, pgs. 80-
83, 85, 87 & 89
,
for LED
Wiring Diagrams. Note: Only use OEM LED strips.
WARNING:
NOTICE
Only use OEM replacement LED strips. Crouse-Hinds Airport
Lighting is not responsible for potential problems or damage that may
occur from using Non-OEM LEDs in the sign. See Table 17, pg. 90,
for LED strip and Lens part number information.
WARNING:
NOTICE
Do not handle the LEDs with bare hands. Doing so may contaminate
the LED surface or deform the LED. This may adversely affect the
LED optical characteristics.