![background image](http://html1.mh-extra.com/html/eaton/66d2041g01/66d2041g01_instructions-manual_526695027.webp)
IL17569
Page 4-2
Effective June, 2001
4.2 Display
4.2.1 Description
The display is a 4-line by 20-character vacuum fluorescent display.
The first line of all display screens is reserved for the screen title.
When the FP-5000 is first powered, the display lights and should
display the system three-phase currents and voltages. This is called
the default display screen shown below.
Note: Pushing the Reset pushbutton will default to the
following screen.
Display 4.1 Default Display Screen
Currents/Voltages
IA = <rms value>
VA or VAB = <rms value>
IB = <rms value>
VB or VBC = <rms value>
IC = <rms value>
VC or VCA = <rms value>
For all other display screens, the first column is reserved for the line
pointer/selector. All display screen data fits within the allocated 3
lines by 20 columns.
4.2.2 Display Sleep Mode
When the unit sits idle for 15 minutes without any pushbuttons
activated, the display goes into a “Sleep Mode,” in which the screen
goes blank. During this time, the unit is still in normal operating mode
protecting and monitoring the system. Every 5 minutes thereafter,
the message “
FP5000 Feeder Relay Push Any Button To Activate
Display
” appears on the display for 30 seconds. This is a reminder
of how to re-energize the display to the Default Display screen.
When in this mode, the pushbuttons only activate the display, not
the function of the pushbutton. The pushbutton must be pushed
again, once the unit shows the Default Display screen, to do its
pushbutton function.
4.2.3 Self Check Failure
Upon initialization, the FP-5000 performs a series of hardware and
software checks to assure proper operation of the protective relay
unit. These checks cover issues such as programming, memory
and calibration of the unit. If a failure is detected then the FP-5000
operational LED will be out and the FP-5000 will display a warning
or failure message. Table 12.1 “Self Test Displays and Status Flag”
covers this topic.
4.2.4 FP-5000 Other Warning or Transient Messages
The FP-5000 has certain modes of operation and actions that may
result in warning or error message. Table 4.2 and Table 12.2 list
messages that may be encountered while programming. For
example if you try to close the breaker that is already closed, the
FP-5000 will display “Error – Breaker Closed.”
Summary of Contents for 66D2041G01
