IL17569
Page 12-8
Effective June, 2001
Table 12.6 Event Operate Cause Table — continued
Cause
Cause Description
Value Given
55A PF
Apparent Power Factor has operated
Miscellaneous Trip Status – contains the status flags
that describe all unbalance, frequency, breaker failure,
power factor, and zone interlocking trips
55D PF
Displacement Power Factor has operated
Miscellaneous Trip Status – contains the status flags
that describe all unbalance, frequency, breaker failure,
power factor, and zone interlocking trips
Zin Trip
Zone Interlock Trip has operated
Miscellaneous Trip Status – contains the status flags
that describe all unbalance, frequency, breaker failure,
power factor, and zone interlocking trips
PwrAlm
The system alarm for Watt, VA,
System Alarm Timeout Status – contains
or VAR has operated
the status flags for all system alarm timeouts
PwrDmdAlm
The system alarm for Watt demand,
System Alarm Timeout Status – contains the status
VA demand, or VAR demand has operated
flags for all system alarm timeouts
CurDmdAlm
The system alarm for Current
System Alarm Timeout Status – contains the status
Demand has operated
flags for all system alarm timeouts
THD CurAlm
The system alarm for Current Total
System Alarm Timeout Status – contains the status
Harmonic Distortion has operated
flags for all system alarm timeouts
THD VolAlm
The system alarm for Voltage Total
System Alarm Timeout Status – contains the status
Harmonic Distortion has operated
flags for all system alarm timeouts
BrkOpAlm
Breaker Operation Alarm, the number
System Alarm Timeout Status – contains the status
of breaker operations has exceeded
flags for all system alarm timeouts
the programmed limit
AccuCurAlm
Accumulated Current Alarm, the
System Alarm Timeout Status – contains the status
accumulated interrupted current the
flags for all system alarm timouts
breaker has opened has exceeded the
programmed limit
Any contact input state change can be logged in the Event log if so programmed. Each input can be logged or not logged according to the
program settings (see Section 5). The value given for each event is: Active for an input transition of low to high, or inactive for an input
transition of high to low. Table 12.7 summarizes the contact input causes for an event log.
Table 12.7 Event Input Cause Table
Cause
Cause Description
Value Given
Cin1State Alt
Contact Input 1 State changed
Active or Inactive
Cin2State Alt
Contact Input 2 State changed
Active or Inactive
Cin3State Alt
Contact Input 3 State changed
Active or Inactive
Cin4State Alt
Contact Input 4 State changed
Active or Inactive
Cin5State Alt
Contact Input 5 State changed
Active or Inactive
Cin6State Alt
Contact Input 6 State changed
Active or Inactive
Cin7State Alt
Contact Input 7 State changed
Active or Inactive
Cin8State Alt
Contact Input 8 State changed
Active or Inactive
Summary of Contents for 66D2041G01
