![background image](http://html1.mh-extra.com/html/eaton/66d2041g01/66d2041g01_instructions-manual_526695151.webp)
IL17569
Page 12-10
Effective June, 2001
As described in Section 12.1, the FP-5000 does a series of self diagnostic checking. If any self test should fail, the event is logged automati-
cally in the event log. See Table 12.11 for a complete list of self test event causes.
Table 12.11 Self Test Event Cause Table
Cause
Cause Description
Value Given
Bt Flash Err
Boot Flash Checksum Failure
No value associated with this cause
ProgFlash Err
Program Flash Checksum Failure
No value associated with this cause
Ext RAM Fail
External RAM Error
Bad RAM Address
TPU RAM Fail
Internal TPU RAM Error
Bad Internal TPU RAM Address
Analog In Err
Analog to digital conversion error
No value associated with this cause
Set Warning
A recoverable Settings (setpoint)
No value associated with this cause
error has occurred
Set Failure
A non-recoverable Settings (setpoint)
No value associated with this cause
error has occurred
Display Warn
Display Warning – read back test failed
No value associated with this cause
RelNotCalibra
No Calibration constants are present
No value associated with this cause
RAM Batt Warn
The non-volatile RAM Battery is low
No value associated with this cause
Clock Warning
The real time clock has failed
No value associated with this cause
Test Mode
The Test Mode has been entered or exited
Enter or Exit
EEPROM Warning
The EEPROM has failed
No value associated with this cause
CalibrateWarn
A recoverable Calibration error has occurred
No value associated with this cause
CalibrateFail
A non-recoverable Calibration
No value associated with this cause
error has occurred
Summary of Contents for 66D2041G01
