Relay station universal, 8-gang
Light Management
Relay station universal, 8-gang
Art. No. RS 8 REG HE
Operating instructions
1 Safety instructions
Electrical equipment may only be installed and fitted by electrically skilled persons.
Serious injuries, fire or property damage possible. Please read and follow manual fully.
Danger of electric shock. Device is not suitable for disconnection from supply voltage.
The applicable regulations and standards for SELV voltage must be observed for
installation of the control sections, the control inputs E1...E8, the activation outputs A1'...
A8' and for cable routing.
Danger of electric shock on the SELV/PELV installation. Do not connect loads for mains
voltage and SELV/PELV together.
For parallel connection of several motors to an output it is essential to observe the
corresponding instructions of the manufacturers, and to use a cut-off relay if necessary.
The motors may be destroyed.
Use only venetian blind motors with mechanical or electronic limit switches. Check the
limit switches for correct adjustment. Observe the specifications of the motor
manufacturers. Device can be damaged.
Risk of injury. Use the device only for controlling Venetian blind and roller shutter
motors or awnings. Do not use it to switch other loads.
Do not connect any three-phase motors. Device can be damaged.
These instructions are an integral part of the product, and must remain with the end
customer.
2 Device components
Figure 1: Device components
(1) Connection for loads
A1...A8
(2) Keypad for local control
(3)
Central Switching Mode
, change-over button and status LED for central function
(4) Status LEDs for load outputs
(5) Connection of control sections or control voltage
1/13
82556943
J:0082556943
01.10.2012
