EASTMAN 3059, Modification Instructions

Page: 89 / 115

2 March 1997 – 9B8929
PLEASE NOTE The information contained herein is based on the experience and knowledge relating to the
subject matter gained by Eastman Kodak Company prior to publication.
No patent license is granted by this information.
Eastman Kodak Company reserves the right to change this information without notice, and
makes no warranty, express or implied, with respect to this information. Kodak shall not be
liable for any loss or damage, including consequential or special damages, resulting from any
use of this information, even if loss or damage is caused by Kodak’s negligence or other fault.
Possible damage from electrostatic discharge.
ESD
Service Effects: Update your manuals with the new Part Numbers, see the table on Page 7.
Special Requirements • 180 LP PROCESSOR with a SORTER and 180 LPS PROCESSOR must
have SORTER Mod 1 installed before attempting to download the 2.24
Software.
• The Kodak Ektascan 2180 LASER PRINTER must have Software Version
2.16 or higher installed before the PROCESSOR 2.24 Operating Software
can be installed.
Serial Numbers: 180 LP PROCESSOR .................................................101 - 3640
180 LPS PROCESSOR...............................................101 - 13320
270 RA PROCESSOR in a MULTILOADER 300 ....101 - 1610
270 RA PROCESSOR ................................................101 - 2495
Installation Time: .5 hour
Special Tools: PORTABLE COMPUTER
INTERFACE CABLE, TL-4391
Parts Status: Modification Kits are available through Service Parts Management.
Parts Requirements: See the Parts List on Page 3.