EASTMAN 3059, Modification Instructions

Page: 109 / 115

2 15APR98 – 7C8295
PLEASE NOTE The information contained herein is based on the experience and knowledge relating to the
subject matter gained by Eastman Kodak Company prior to publication.
No patent license is granted by this information.
Eastman Kodak Company reserves the right to change this information without notice, and
makes no warranty, express or implied, with respect to this information. Kodak shall not be
liable for any loss or damage, including consequential or special damages, resulting from any
use of this information, even if loss or damage is caused by Kodak’s negligence or other fault.
This equipment includes parts and assemblies sensitive to damage from electrostatic
discharge. Use caution to prevent damage during all service procedures.
MODIFICATION KIT 7C8702 includes:
Service Effects: Make wiring changes to the wiring diagrams DIAGRAM PACKAGE, 1C7841.
Special Requirements: The 180 LP SORTER, if fitted, must have Modification No. 1, 1C7525.
Serial Numbers:
101-3999.................................180 LP PROCESSOR
10001-13499...........................180 LPS PROCESSOR
Installation Time: Approximately 1.5 hours.
Special Tools: • PORTABLE COMPUTER
• INTEFACE CABLE TL-4391
Parts Status: Available through Service Parts Management.
Parts Requirements: See table below.
Part No. Description Qty.
7C8295 MODIFICATION INSTRUCTIONS 1
955745 QUAD POWER SUPPLY 1
7C8704 WIRING KIT:
• WIRE No. 13
• WIRE No. 14
• CONNECTOR J9 AND WIRING ASSEMBLY
• 17 TIE WRAPS
1
9B8473 SOFTWARE DOWNLOAD DISK, Version 2.25 1
918095 STANDOFF KIT 1
655272 HEATSINK COMPOUND PACKET 1