EASTMAN 3059, Modification Instructions

Page: 67 / 115

MODIFICATION INSTRUCTIONS, TYPE1
8 29JUN96 – 8B6658
[3] For the MULTILOADER 300 only:
(a) Circle the “29” on the MODIFICATION LABEL.
• On MULTILOADERS Serial No. 1369 and below, see Figure 8.
• On MULTILOADERS Serial No. 1370 and above, the MOD LABEL is inside the MAGAZINE
DOOR. See Figure 9.
(b) Move the main wall CIRCUIT BREAKER to “ON”.
(c) Energize the MULTILOADER.
(d) Check that the water flows out of the TUBING BRACKET into the center of the WATER MANIFOLD.
If not, bend the TUBING BRACKET.
(e) Install the WET SECTION COVER.
(f) Move the PROCESSOR into the MULTILOADER 300.
(g) Check for correct operation of the PROCESSOR.
Figure 8
MULTILOADERS 300 with Serial
No. 1369 and Below
Circle the “29”.
Figure 9
MULTILOADERS 300 with Serial No. 1370 and Above
H118_0001AC
H118_0001ACB
LABEL
MOD
H118_0055AC
H118_0055ACA
LABEL
MOD