16 Installation
If the combo unit is part of a longer packaging line, take into consideration the table and
conveyor height in relation to adjacent machinery.
The machine should be placed on a flat, level floor so that it does not rock or move. We
recommend that the machine be securely locked in place when used.
Set up the combo unit and move it to its location. The casters allow easy movement
over smooth flat surfaces. If you need to lift the unit to move it, you will need to use a
pallet jack, floor crane, or fork lift to move it to its location.
CAUTION!
If the combo unit must be lifted for moving, use proper
equipment when lifting and moving it to ensure it is secure
and will not shift.
When the combo unit has been moved to its location, use the levers on the casters to
lock the wheels to prevent rolling and keep the unit in place. A power cord (with optional
electrical plug) should be installed by a licensed electrician.
CAUTION!
Before operating, ensure the following.
1. All shipping ties are removed.
2. All personnel are clear of the equipment.
3. Electrician has stated that all electrical work is complete.
4. Adjust all controls according to the settings sheet.
Refer to instructions in the Operation section for instructions to power up or shut down
the machine.
Summary of Contents for Combination EC Series
Page 2: ......
Page 4: ......
Page 73: ...Appendix A Electrical Schematic 73 Electrical Schematic L Sealer ...
Page 81: ......
