EasternCCTV HIK-504-32 User Manual Download Page 93

Page: 93 / 187

User Manual of Digital Video Recorder

6.2

Auxiliary Functions of Playback

6.2.1

Playing Back Frame by Frame

Purpose:

Play video files frame by frame, in order to check image details of the video when abnormal events happen.

Steps:

•

Using a Mouse

Go to Playback interface and click button

until the speed changes to

Single

frame. One click on the

playback screen represents playback or adverse playback of one frame. It is also feasible to use button

in toolbar.

•

Using the front panel (if supported)

Press the

button to set the speed to

Single

frame. One click on the playback screen or press

button

on the front panel represents playback or adverse playback of one frame.

6.2.2

Digital Zoom

Steps:

Click the

button on the playback control bar to enter Digital Zoom interface.

Use the mouse to draw a red rectangle and the image within it will be enlarged up to 16 times.

Figure 6. 21

Draw Area for Digital Zoom

Right-click the image to exit the digital zoom interface.

6.2.3

Reverse Playback of Multi-channel

Purpose:

Summary of Contents for HIK-504-32




























































































































































































Search results

Summary of Contents for HIK-504-32

Reviews:

Related manuals for HIK-504-32

Brands by name

Popular brands

EasternCCTV HIK-504-32, User Manual

Search results

Summary of Contents for HIK-504-32

Reviews:

Related manuals for HIK-504-32

Brands by name

Popular brands