EasternCCTV HIK-504-32 User Manual Download Page 73

Page: 73 / 187

User Manual of Digital Video Recorder

Configure the record schedule.

Please refer to the

Chapter 5.2 Configuring Record Schedule

, while you may choose Holiday in the

Schedule dropdown list, or you can draw the schedule on the timeline of Holiday.

Figure 5. 24

Edit Schedule- Holiday

Up to 8 periods can be configured for each day. And the time periods cannot be overlapped each other.

In the time table of the channel, both holiday schedule and normal day schedule are displayed.

Repeat the above step 4 to set Holiday schedule for other channel. If the holiday schedule can also be used to

other channels, click

Copy

and choose the channel you want to apply the settings.

Summary of Contents for HIK-504-32




























































































































































































Search results

Summary of Contents for HIK-504-32

Reviews:

Related manuals for HIK-504-32

Brands by name

Popular brands

EasternCCTV HIK-504-32, User Manual

Search results

Summary of Contents for HIK-504-32

Reviews:

Related manuals for HIK-504-32

Brands by name

Popular brands