EasternCCTV HIK-504-32 User Manual Download Page 54

Page: 54 / 187

User Manual of Digital Video Recorder

4.2.6

Calling Patterns

Purpose:

Follow the procedure to move the PTZ camera according to the predefined patterns.

Steps:

Click the button

PTZ

in the lower-right corner of the PTZ setting interface;

Or press the PTZ button on the front panel or click the PTZ Control icon

in the quick setting bar, or

select the PTZ option in the right-click menu to show the PTZ control panel.

Click the

button to show the general settings of the PTZ control.

Figure 4. 9

PTZ Panel - General

Click the

Call Pattern

button to call it.

Click the

Stop Pattern

button to stop calling it.

4.2.7

Customizing Linear Scan Limit

Purpose:

The Linear Scan can be enabled to trigger the scan in the horizantal direction in the predefined range.

This function is supported by some certain models.

Steps:

Enter the PTZ Control interface.

Menu > Camera > PTZ

Summary of Contents for HIK-504-32




























































































































































































Search results

Summary of Contents for HIK-504-32

Reviews:

Related manuals for HIK-504-32

Brands by name

Popular brands

EasternCCTV HIK-504-32, User Manual

Search results

Summary of Contents for HIK-504-32

Reviews:

Related manuals for HIK-504-32

Brands by name

Popular brands