EasternCCTV HIK-504-32 User Manual Download Page 84

Page: 84 / 187

User Manual of Digital Video Recorder

Figure 6. 6

Video Search by Motion Detection

Click

Search

, and the record files matching the search conditions will be displayed on a list.

Select and click

button to play back the record files.

You can click

Back

to return to the search interface.

If there is only one channel triggered, clicking

button takes you to Full-screen Playback interface of

this channel.

If several channels are triggered, clicking

button takes you to the synch playback interface. Check

checkbox to select one channel for playback or select multiple channels for synchronous playback.

The max. number of channels for synchronous playback supported varies to different models.

Figure 6. 7

Select Channels for Synchronous Playback

Summary of Contents for HIK-504-32




























































































































































































Search results

Summary of Contents for HIK-504-32

Reviews:

Related manuals for HIK-504-32

Brands by name

Popular brands

EasternCCTV HIK-504-32, User Manual

Search results

Summary of Contents for HIK-504-32

Reviews:

Related manuals for HIK-504-32

Brands by name

Popular brands