Plasmasonic
®
DRSSTC Instruction Manual
December 2019, REV -
− 24 −
http://www.EasternVoltageResearch.com
Plasmasonic
®
1.3 DRSSTC Instruction Manual
2. Connect the power cord to the terminals on the Power Distribution Board, as
shown in Figure 7 below, labeled 115VAC, NEUTRAL, and GND. Connect the
appropriate color wire to the terminal as shown below.
Power Cord Wire Color
Terminal
Black
115VAC
White
NEUTRAL
Green
GND
Figure 7 – Input Power Connections to Plasmasonic DRSSTC
3. Once the power cord is connected to the Power Distribution Board, please
secure the power cord to the bottom base assembly using the provided two (2)
cable clamps as shown above in Figure 7.
4. Check and ensure that all cables, wires, and connections are properly secured
and connected among all the subassemblies within the system. You will be
looking for any loose wires, connectors, or terminals that may have come undone
during the shipping / handling process. You should be making this check EACH
and EVERY time before you assemble and operate the Plasmasonic DRSSTC.