Plasmasonic
®
DRSSTC Instruction Manual
December 2019, REV -
− 28 −
http://www.EasternVoltageResearch.com
Plasmasonic
®
1.3 DRSSTC Instruction Manual
Operating Instructions – Pulse Mode
Please read and understand all safety instructions prior to operating your
Plasmasonic DRSSTC Musical Tesla Coil!
1. Please read and understand all safety instructions prior to operating the
Plasmasonic DRSSTC Musical Tesla Coil. This should be done EACH and
EVERY time prior operating the Tesla Coil.
2. Be sure that all individuals in close proximity to the Plasmasonic system are
wearing both safety glasses and hearing protection. If in a general audience
setting, please announce to everyone to cover their ears with their hands at this
time if they do not have readily available hearing protection.
3. Verify that everyone is at a safe viewing distance away from the Plasmasonic
system per the layout shown above in Figure 6.
At no time should anyone approach the Plasmasonic system while the unit is
plugged in and only approach the system after 5 minutes have passed once the
system is unplugged from the AC line power.
4. Set the Pulsewidth ADJ on the handheld controller to the minimum setting.
This is done by turning the PW knob all the way to the left counterclockwise.
The handheld controller should be OFF at this time.
5. Set the Frequency ADJ on the handheld controller to the minimum setting.
This is done by turning the PRF knob all the way to the left counterclockwise.
The handheld controller should be OFF at this time.
6. Switch the MODE switch to the PULSE position.
