background image

Summary of Contents for MFF312BSF

Page 1: ... 1 2 for models equipped with storage drawers Fig 3 Edge 30 MINIMU M CLEARANCE BETWEEN THE TOP OF THE COOKING SURFACE AND THE BOTTOM OF AN UNPROTECTED WOOD OR METAL CABINET OR 24 MINIMUM WHEN BOTTOM OF WOOD OR METAL CABINET IS PROTECTED BY NOT LESS THAN 1 4 FLAME RETARDANT MILLBOARD COVERED WITH NOT LESS THAN NO 28 MSG SHEET STEEL 0 015 STAINLESS STEEL 0 024 ALUMINUM OR 0 020 COPPER 0 CLEARANCE IS...

Page 2: ...ge to tip over if excessive weight is placed on an open door or if a child climbs upon it Serious injury might result from spilled hot liquids or from the range itself If range is ever moved to a different location the Anti Tip Bracket must also be moved and installed with the range Instructions are provided for installation in wood or cement fastened to either the floor or wall When installed to ...

Page 3: ...talled three 3 conductor Power Supply Cord See Range Connection Opening Size Chart Figs 8 9 for cord kit ampere rating information Terminals on end of wires must be either closed loop or open end spade lugs with upturned ends 2b MODELS REQUIRING POWER SUPPLY CORD KIT RISK OF FIRE OR ELECTRICAL SHOCK MAY OCCUR IF AN INCORRECT SIZE RANGE CORD KIT IS USED THE INSTALLATION INSTRUCTIONS ARE NOT FOLLOWE...

Page 4: ... range review the suggested power source location drawings in Fig 3 1 Followthe manufacturer s installation instructions supplied with the strain relief and install Also see Figs 8 9 10 2 Strip insulation away from the ends of the permanent wiring for Line 1 Line 2 Neutral Tighten all 3 wire leads to the terminal block Follow wire locations shown in Fig 12 IMPORTANT NOTE DO NOT LOOSEN the factory ...

Reviews: