Easson ES-12, Operation Manuals, Page: 87 / 122

- A. 8 -
Step 9 : The tool turret have been aligned to the inclined angle of 20 degree accurately, press to
exit the INCL function cycle, put off the dial indicator and replace with lathe cutter
tool for conical machining.
0 0
0
move lathe's cross slide
until X axis display = 0.000
Step 7 : Move the lathe's cross slide along X axis until the X axis DRO display = 0.000
swing the tool turret
until the dial indicator
pointing to ZERO
0 0
0 0
0
The angular alignment of the tool turret is an iteratively process, operator may have to repeat the Step 4
to Step 8 again to fine tune the incline angle, until there is no swinging of the tool turret is needed in the
Step 8, which means the best possible alignment accuracy have been achieved.
Step 8 : Swing the tool turret until the dial indicator pointing to ZERO
presently in INCL function cycle
exit
INCL
function, return to
normal display
-20
o
replace the dial indicator with
a lathe cutter tool for conical
machining
INCL function - To swing the tool turret on the cross slide for conical machining
X
Y
Z
ABS X=0 ANG-20.00
49.985
0.000
0.000
Z
X
INCL.
X
Y
Z
ABS X=0 ANG-20.00
0.000
0.000
0.000
Z
X
INCL.
X
Y
Z
ABS
mm
mm
mm
-78.560
45.675
12.345