Easson ES-12, Operation Manuals, Page: 100 / 122

Parameters Setup Procedure - RESOLU
For example, if you want to make a change to the current resolution ( 0.005mm ) of X axis, to change it
to 0.001mm resolution, procedure are as follows
Press or to specify the X axis, if the current resolution display is 0.005mm, it will swap to 0.001mm
after the key press, and vice versa. The same procedure applied to Y , Z and U axis
The X axis resolution display
have change from 0.005mm
to 0.001mm
selection done
go to next menu
then press to exist from
"RESOLU" menu and return to
the top level menu
Press to select the "RESOLU" selection menu
RESOLU menu is designed to allow operator to specify the resolution display for each individual axis. The ES-12 is
design to work with the linear scales of either 0.005mm or 0.001mm resolution. Mixed resolutions display ( i.e. X
axis in 0.005mm, Y axis in 0.001mm resolution is allowed in the ES-12 ). All DRO functions can work properly under
the mixed resolutions display.
The display resolution is either 0.005mm or 0.001mm, user can simply press the respective axis button to select
the resolution display needed.
The resolution display of each
axis is displayed on the digit
display window
press the axis buttion to swap the resolution display, make your selection choice by pressing the "ent" key
- B. 10 -
X
Y
Z
U
RESEOLU.
X
Y
Z
U
RESEOLU.
X
Y
Z
U
SEL.AXIS
0.005
0.005
0.005
0.005
X
Y
Z
U
SEL.AXIS
0.005
0.005
0.005
0.005
X
Y
Z
U
SEL.AXIS
0.001
0.005
0.005
0.005
X
Y
Z
U
SEL.AXIS
0.001
0.005
0.005
0.005