GFL-Series User Manual V1.1
28
www.eepowersolutions.com | Tel: 1-877-805-3377 | Fax: 1-414-962-3660 | [email protected] | V1.1
Figure 7-3 Oscilloscope Function
Three channels are provided. These can be enabled by checking the boxes labelled 1,
2 and 3. The range of each channel can be changed in the boxes to the right of the
channel numbers. The time per division can be changed in the same way.
Channel 1 (blue) displays the signal filtered by the band pass filter.
Channel 2 (red) displays the unfiltered signal
Channel 3 (green) displays the synchronization signal.
The
Hold
button will capture the display as viewed, and
Run
will release the hold
function.
The frequency indicated above the display shows the frequency of the Signal Receiver
and cannot be changed.