![background image](http://html1.mh-extra.com/html/eagle-eye-power-solutions/gfl-1000/gfl-1000_user-manual_3284128027.webp)
GFL-Series User Manual V1.1
26
www.eepowersolutions.com | Tel: 1-877-805-3377 | Fax: 1-414-962-3660 | [email protected] | V1.1
5
500
10
1000
25
2500
For initial use, use the 0.5Hz setting as this will allow analysis of frequencies around the
Signal Generator frequency of 10Hz.
7.1.2 BP (Band Pass) Filter
The band pass filter can be enabled to remove interference. The frequency is fixed at
10Hz to suit the Signal Generator frequency. Switch on the band pass filter if there is
significant interference when using the Spectrum Analyzer.
7.1.3 Spectrum Analysis
Press
OK
and the Spectrum Analysis screen will be displayed, shown in Figure 7-2. The
blue cursor on the screen may be moved using the stylus or by touch, and the value of
the frequency at the cursor is displayed in blue. The drag bar at the bottom of the
screen varies the portion of the full range under analysis to be displayed. At the top of
the screen, the four frequencies with the highest amplitude are listed.