Product Manual Oria Thermostat
EAE KNX Oria Thermostat
Oria Thermostat PM R1.0
©
EAE Technology
www.eaetechnology.com
Sayfa
22
/ 50
4.2.2.2.1
Parameters
Parameter
Setting
Description
Dim Operation
Darker(Short Press Off)
Brighter(Short Press On)
Darker/Brighter (Short Press Toggle)
Select push button dim operation. (For
more information Chapter 4.2.2.2)
Long Press Time
300ms/ 400ms/ 500ms/ 600ms/ 800ms /
1s
/ 1.2s / 1.5s/ 2s / 3s / 4s / 5s / 6s / 7s
/ 8s / 9s / 10s
Time interval to switch from
“switch/toggle mode” to “dimming mode”.
Dimming Type
Start Stop
/ Step Wise
Select dimming type. ( For more
information Chapter 4.2.2.2)
Step Value
%100 / %50 / %25 /
%12.5
/ %6.25 /
%3.13 / % 1.56
Visible when dimming type is Step Wise.
Selects the dimming resolution that will be
sending at every “Step Send Interval”.
Step Send Interval
300ms/ 400ms/ 500ms/ 600ms/ 800ms /
1s
/ 1.2s / 1.5s/ 2s / 3s / 4s / 5s / 6s / 7s
/ 8s / 9s / 10s
Visible when dimming type is Step Wise.
Selects the time interval to send dimming
increase/decrease values
Function of LED
LED Permanently Off
LED always off
LED Permanently On
LED always on
Status Indication
Last transmitted command “on” -> LED on
Last transmitted command “off” -> LED off
If “Separate Comm Object” enabled, status
LEDs will wait for confirmation before
changing status.
Inverted Status Indication
Last transmitted command “on” -> LED off
Last transmitted command “off” -> LED on
If “Separate Comm Object” enabled, status
LEDs will wait for confirmation before
changing status.
Operation Indication
Status LED of the pressed push button will
be on for the time period selected at
“Light Duration of LED” parameter at
“General” tab.
Separate Comm
Object
Enable /
Disable
Only visible when “Function of LED”
selected as “Status Indication” or
“Inverted Status Indication”. This
communication objects is the input of
confirmation for status LEDs. If selected
“Enable” respective communication object
should be linked to an appropriate group
address.
Table 19
