G r o u p c a l l s
47
Call a scanned talk group
To make a call to a scanned group after the conversation has ended,
press and hold the PTT key while the group name and
are still on
the display.
If you have set the PTT key to always make a call to the selected
group, you cannot call a scanned group in this way; see PTT key
settings on page 43. To call the scanned group, first set it as the
selected group; see Select a talk group on page 42.
Call a dispatcher (network service)
1. To access the list of talk groups in the selected folder, press
in the idle mode.
2. Scroll to the desired group, and press
.
If the group whose dispatcher you are calling is not your selected
group or if you are not scanning the group, you may have to wait a
few seconds before your call is connected. Note that all talk groups
may not have dispatchers.
If the call is changed to a one-way call,
Use PTT to speak
is
displayed, and you must press and hold the PTT key when you
speak.
You can also set the radio to start a phone call to the dispatcher of
the selected group when you press the duty key
; see Duty key
setting on page 94. If the call is changed into a one-way phone call,
press and hold the PTT key when you speak.
p
Talk groups (Menu 5)
This menu contains the folders and talk groups that have
been stored in the memory of your radio. You can also view
and change settings related to groups, and view the group journal.
See also Home group on page 40, and Start group communication
on page 41.
