Y o u r r a d i o
26
Making a red key call and sending a status message
Making a
red key call
and sending a status message can be done
also simultaneously, either to the same destination or to different
destinations. For more information, contact your organisation.
p
Group selector and back key
In the network mode, turning the group
selector is used for selecting groups. The
names of the current folder and group are
shown on the display. It may also be
possible to browse the groups of the
selected folder in a continuous loop.
The back key in the middle of the group
selector is used for switching between
groups. Pressing the back key switches between groups that have
the same index number as the last two selected groups (excluding
the home group), and pressing and holding the back key selects the
home group. See Home group on page 40.
In the direct mode, the group selector is used for selecting channels.
The name of the channel is shown on the display. Each channel may
have up to three groups. Pressing and holding the back key selects
the first group (A) on the channel, and pressing the back key
switches between the second and the third group (B and C) on the
channel.
If voice feedback is activated, the radio plays the index number of
the group or channel when you turn the group selector. When you
use the back key, the radio plays the index number or index name
(A, B, or C) of the group, or "Home" if the home group is selected.
See Voice feedback on page 38.