G e t t i n g s t a r t e d
19
p
Install the electromagnetic interference filters
For all other radios except for RC-3
To check the type number of your radio, remove the battery. The
type number (RC-19 and RC-20) is printed on the white label inside
your radio. When charging your radio with the charger ACP-12, you
need to use two electromagnetic interference filters. The only
exception is the RC-3 radio, which does not require using these
filters. Two filters are supplied in the sales package, and they are
also available as separate accessories.
Install the filters to the charger’s power cord before you connect the
charger to the radio or an AC wall outlet.
1. The filters should be placed on the power cord one after the
other, within 15 cm (6 inches) of the charger. Place the power
cord inside the opened filter, and then wrap it in one loop around
the filter.
2. Close the filters around the power cord.
