Page N-6
WEATHER PROTECTION
Repair and Service Manual
Read all of Section B and this section before attempting any procedure. Pay particular attention to all Notices, Cautions, Warnings and Dangers.
B
Fig. 10 Wiper Arm Release Tab
4. Remove the four screws (11) and cover (12) from the
wiper motor.
5. Remove the hex nuts (13) and washers from the pivot
shaft (14).
6. While holding the wiper motor remove the screw (4)
securing the wiper motor to the mounting bracket.
7. Disconnect the wires from the wiper motor and
remove the motor from the header bar making sure to
retain the spacer and washers on the pivot shaft.
Installation
1. Install brake drum washer (1), Flat washer (2) to the
motor shaft in order shown.
Release Tab
12
11
13
14
4
