62
E-MU Systems
Sequencer
Pattern Mode
9.
Press the
Preset View
button again after you’ve selected a preset. The
LED will go out and you’ll be returned to the Pattern screen.
Get ready to record the first track!
O
O
O
O
You can go in and out of
Record mode at any time by
pressing the
Record
button
10.
Press
Play
to begin recording. Recording will begin after the count-in
period (if any). The pattern will loop when it reaches the end of its
length.
11.
Press
Stop
when you’re finished recording.
Are you happy with your performance? If not, you can erase the track and
try again.
To Erase the Track
O
O
O
O
To Quick-Erase a Track:
Press and Hold the
Erase
button,
then press the
Track
button you
want to erase.
12.
Press the
Pattern Edit
button and turn the data entry control until you
find the “Cut Track to Clipboard” screen.
13.
Move the cursor to the lower line of the display under
Track 1
.
14.
Press the flashing
Enter
button to erase the track.
15.
Press the
Pattern Edit
button again to exit the menu, then go back to
step 10 and re-record the track.
O
O
O
O
To Erase an Entire
Pattern:
Copy an “Empty
Sequence” over the pattern.
(Save/Copy menu).
To Erase Specific Notes
16.
Press the
Erase
button in Realtime Record mode and
hold down the
keyboard note
you wish to erase. The note will be erased when it
comes around in the pattern.
To Record another Track
17.
Press the
+Track
button located to the left of the LCD. The track
number increments to Track 02.
O
O
O
O
To Quick-Select a Track:
1. Press and hold
Tap
.
2. Press the
Track Enable/Mute
button corresponding to the
track you wish to select.
18.
Press the
Preset View
button. Notice that the MIDI channel has also
incremented to C02A. Select a preset.
19.
Press the
Preset View
button again after you’ve selected a preset. You’ll
be returned to the Pattern screen.
20.
Press the
Stop
button to return the beginning of the pattern.
21.
Press
Record
, then
Play
to begin recording on track 2.
22.
After recording track 2, check out the
Track Enable
buttons to mute
and un-mute the tracks.
23.
A pattern must be SAVED or it will be erased when you power down or
record another pattern. See “Save Pattern” on page 287.
You can continue to add up to 16 tracks. If you need more than this,
keep in mind that you can add up to 16 channels of data to each track!
Normally, it’s simpler to use just one channel per track.
•
To setup a track for multichannel playback see “Channel Assign” on
page 96.
Summary of Contents for XL-7 Command Station
