E-Mu XL-7 Command Station, Owner'S Manual

Page: 42 / 384

30 E-MU Systems
Instant Gratification
Multi-Channel Arpeggiator
Time to Save?
If you want to SAVE everything exactly as it is, continue on.
 
 
Multisetups save your
entire XL-7 setup. Find out more
on page 148.
1.
Press the Save/Copy button.
2.
Rotate the data entry control until you get to the menu shown below.
3.
Press the right cursor button to move to the lower line.
4.
Name your Multisetup so you can find it later, then press Enter .
5.
Scroll to the next screen using the data entry control .
6.
Move the cursor to the lower line, select a location and press Enter .
To Record the Trigger Buttons
You can record the note trigger buttons into the sequencer in order to
automate your multi-arpeggiator performance. These instructions also
apply to recording trigger buttons without the arpeggiators.
1.
Set up the multichannel arpeggiators as described on page 28.
2.
Press the Pattern Edit button and scroll to the Channel Assign screen
shown below.
 
 
If you want to record the
Trigger Buttons on a single MIDI
channel, set the track Channel
Assignment to the same channel
as the trigger buttons.
3.
Set the channel setting to MultiA and Dest: internal, as shown in the
screen below. (The trigger buttons are set to play on multiple MIDI channels.
if this track were not set to Multi, all channels would be rechannelized to the
selected channel and the triggers would play back incorrectly.)
4.
Make sure that the Trigger Buttons destinations are set to “seq” as
shown below.
(This sends the trigger keys to the sequencer input.)
MULTISETUP NAME
User Setup
SAVE SETUP TO
002 User Setup
T
01 CHANNEL ASSIGN
Channel: MultiA Dest: int