E-Mu PROTEUS FX, Operation Manual, Page: 32 / 122

30
MASTER MENU
SEND MIDI DATA
This function transmits MIDI System
Exclusive data to the MIDI Out port. MIDI
data can either be sent to a computer/
sequencer or to another Proteus FX.
Using the cursor key and the data entry
control, select the type of MIDI data you
wish to transmit. The choices are:
Effect Settings
Transmits all the current effects param-
eters except mix select (for the 16 MIDI
channels).
Master Settings
Transmits all parameters in the Master
menu except effects, tuning table,
program/preset map and viewing angle.
Program/Preset Map
Transmits only the program/preset map.
Tuning Table
Transmits only the user tuning table.
Factory Presets
Transmits all the factory presets.
User Presets
Transmits all the user presets.
Any Individual Preset
Transmits only the selected preset.
SEND MIDI DATA
000 kbd:BritePno
The Enter LED will be flashing. Press the
Enter button to confirm the operation.
TO TRANSMIT MIDI DATA TO A
SEQUENCER
1. SET UP SEQUENCER TO RECEIVE
SYSTEM EXCLUSIVE DATA.
2. START SEQUENCER RECORDING, THEN
SEND PRESET DATA.
TO RECEIVE MIDI DATA FROM A
SEQUENCER
1. SIMPLY PLAY BACK THE SEQUENCE
INTO PROTEUS FX
USER KEY TUNING
In addition to standard twelve tone equal
temperament, Proteus FX contains four
additional preset tuning tables (Just C,
Vallotti, 19 tone, and Gamelan) and one
user definable tuning. User Key Tuning
allows you to alter the parameters of the
user definable tuning stored in memory.
The initial frequency of every key can be
individually tuned, facilitating the cre-
ation of microtonal scales. Using the
cursor key and the data entry control,
select the key name, the MIDI key num-
ber and the fine tuning. The key name is
variable from C-2 to G8. MIDI key num-
ber is variable from 0 to 127. The fine
tuning is variable from 00 to 63 in
increments of 1/64 of a semitone (approx.
1.56 cents). For each preset, the specific
tuning table is selected in the Edit menu.
USER KEY TUNING
Key:C1 036-00
VIEWING ANGLE
This function allows you to change the
viewing angle of the display so that it may
be easily read from either above or below.
The angle is adjustable from +7 to -8.
Positive values will make the display
easier to read when viewed from above.
Negative values make the display easier to
read from below.
VIEWING ANGLE
+7
APPLICATION: THE USER KEY
TUNING CAN BE USED TO
TUNE INDIVIDUAL
PERCUSSION INSTRUMENTS.
THE PRESET, VOLUME, AND
PAN INFORMATION FOR ALL
16 CHANNELS IS INCLUDED
WHEN THE MASTER
SETTINGS ARE TRANSMITTED
OR RECEIVED.
WARNING! WHEN
TRANSFERRING SYSEX
DATA FROM ONE
PROTEUS FX TO
ANOTHER, THE ID
NUMBERS OF BOTH
UNITS MUST MATCH.
1