E-Mu MP-7 command station, Owner'S Manual

Page: 88 / 388

76 E-MU Systems
Sequencer
Pattern Edit Menu
In Song Mode
Loop Section works a little differently in Song mode where it simply
specifies alternate start and end points. When the song reaches the
endpoint, it stops and auto locates to the start point. In both pattern and
song modes, RTZ still locates to the beginning of the sequence.
To Set the Temporary Bar Region from the Pattern & Song menus
The loop points and the loop on switch can be set while the sequencer is
either running or stopped.
1.
Locate the Temporary Loop Points screen in the pattern or song menu.
2.
Use the cursor buttons to move the cursor to the lower line of the
display.
3.
Turn the Loop on.
4.
“From” sets the loop start point and “Thru” sets the loop end point.
Shift-Key Method to Set the Temporary Bar Region
These hidden “power-user” features are designed to be used while the
pattern or song is playing, but the loop points can be set when the
sequencer is either running or stopped.
Setting the Loop From and Thru Points
1.
Start the sequencer.
2.
To set the “Loop From” point: Hold Tap and hit Select (to the left of the
LED display) when the pattern or song is playing, or is located to, the
desired bar.
3.
To set the “Loop Thru” point: Hold Tap and hit Edit (to the right of the
LED display) when the pattern or song is playing, or is located to, the
desired bar.
Turning the Loop On and Off
4.
Hold Tap and hit the Stop button. This toggles Loop on and off.