manualshive.com logo in svg

E-Mu MP-7 command station, Owner'S Manual

Share
Download
E-Mu MP-7 command station Owner'S Manual Download Page 16

 

4 

 

  E-MU Systems

 

Important Safety Instructions

 

Important Safety Instructions

 

Use in countries other than the U.S.A. may require the use of a different 
line cord or attachment plug, or both. Refer all servicing to qualified service 
personnel. There are no user serviceable parts or adjustments inside the 
unit. There are no user serviceable parts inside the power supply enclosure. 

 

WARNING:

 

 To reduce the risk of fire or electric shock, do not expose this 

product to rain or moisture. 

 

Grounding 
Instructions

 

This product must be grounded. If it should malfunction or break down, 
grounding provides a path of least resistance for electric current, reducing 
the risk of electric shock. This product is equipped with a cord having an 
equipment-grounding conductor and a grounding plug. The plug must be 
plugged into an appropriate outlet properly installed and grounded in 
accordance with all local codes and ordinances.

 

Mains Switch

 

The front panel On/Off switch is a “Soft” power switch that can be used to 
turn power on and off when the MP-7 is rack mounted. Use the AC power 
switch on the rear panel if you wish to completely disconnect MP-7 from 
the AC mains.

 

Danger!

 

Improper connection of the equipment’s grounding conductor can result in 
the risk of electric shock. Check with a qualified electrician or service 
personnel if you are in doubt as to whether the product is properly 
grounded. Do not modify the plug provided with this product. If it will not 
fit the outlet, have a proper outlet installed by a qualified technician.

Summary of Contents for MP-7 command station





































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands