manualshive.com logo in svg

E-Mu MP-7 command station, Owner'S Manual

Share
Download
E-Mu MP-7 command station Owner'S Manual Download Page 125

MP-7 Owners Manual   

113

Sequencer

Song Edit Menu

Metronome

The metronome is a timing aid when recording or playing back songs and 
can be set to a wide variety of different beats. The metronome produces an 
accented click on the first beat of each measure and a softer click on other 
beats. The metronome beat options are listed on page 74.

The metronome setting is NOT saved with the Song.

  

To Set the Metronome

1.

Press the 

Song Edit

 button. The Pattern Edit menu screen displays the 

menu page most recently selected since powering up MP-7.

O

O

O

O

Play the pattern to listen 

to the Metronome while you set 
the Value.

2.

Scroll to the 

Metronome

 screen using the data entry control.

3.

Move the cursor underneath the 

Metronome

 field and turn the 

metronome to 

On

, 

Off

 or 

Rec

 using the data entry control.

•

Off

 - the metronome doesn’t play.

•

On

 - the metronome plays during recording and playback.

•

Rec

 - the metronome only plays while recording.

4.

Move the cursor underneath the 

Value

 field and set the metronome 

beat value using the data entry control.

Quantize

The timing of note events can be changed after a song has been recorded. 
Quantize moves all the note start times in the track to fall on (or closer to) 
the specified time values. 

See “Quantize” on page 77 for more information 

about quantization.

Note:

 This filter quantizes note data recorded in Realtime Song mode. It 

does NOT affect the notes in Patterns.

  

To Quantize Note Events in a Song

1.

Select the song.

2.

Press the 

Song Edit

 button.

3.

Scroll to the 

Quantize

 screen using the data entry control.

4.

Set up the 

Quantize parameters

 as desired. The Home/Enter LED will 

be flashing once the cursor is moved to one of the editable fields.

5.

Press 

Enter

 to Quantize or add Swing. Press any other button to 

Cancel

.

METER      METRONOME      VALUE

04 / 4       off                    1/8          

QUANTIZE    Resolution: 16

Amount:  75%    Swing: 50%

Summary of Contents for MP-7 command station





































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands