manualshive.com logo in svg

E-Mu MP-7 command station, Owner'S Manual

Share
Download
E-Mu MP-7 command station Owner'S Manual Download Page 171

MP-7 Owners Manual   

159

MIDI Menu

Most of the parameters in MP-7 that relate to MIDI are contained within 
this menu. You can merge MIDI data, change the continuous controller 
assignments, turn program changes off or on, and lots more.

MIDI menu settings are saved with the current Multimap.

  

To enable the MIDI menu

Press the MIDI button, lighting the LED. The MIDI Menu screen displays 
the menu page most recently selected since powering up MP-7. The cursor 
appears below the first character of the screen heading on line one.

_

_

_

_

Warning: 

MIDI Menu 

changes are automatically saved 
when you exit the menu. If the 
power is turned off before you 
exit the menu any changes you 
have made will be lost. 

  

To select a new screen

Press the Home/Enter button or press the Cursor button repeatedly until 
the cursor is below the screen title heading. Rotate the data entry control to 
select another screen.

  

To modify a parameter

Press either Cursor button repeatedly (or hold down the right cursor button 
while turning the data entry control) until the cursor is below the desired 
parameter value. Rotate the data entry control to change the value.

  

To return to the previously selected Mode/View screen

Press the MIDI button, turning off the LED.

Summary of Contents for MP-7 command station





































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands