manualshive.com logo in svg

E-Mu MP-7 command station, Owner'S Manual

Share
Download
E-Mu MP-7 command station Owner'S Manual Download Page 111

MP-7 Owners Manual   

99

Sequencer

Pattern Edit Menu

Poly Pressure Edit

Polyphonic pressure messages are assigned on a per note basis and have 
range of 0-127. MP-7 can generate polyphonic pressure messages, but it 
cannot receive them. 

Program Change Edit

Program change numbers from 0-127, and on any bank number, can be 
inserted, deleted or edited in this screen. If you do not select bank numbers 
(off), the program change will be sent to the currently selected bank. See 
“Bank Select Commands” on page 196.

_

_

_

_

In order to send program 

changes to external devices, the 
Track must be assigned to an 
“external” channel. See page 94 
for details.

  

To Edit a MIDI Event

1.

Select the pattern

 you wish to edit.

2.

Press the 

Pattern Edit

 button.

3.

Scroll to the 

Event List Editor

 screen shown below using the data entry 

control.

4.

Press the 

Enter

 button as prompted by the display to begin editing.

5.

Select the 

Track

 that you want to edit using the Track/Channel select 

button near the LCD.

T

01  EVENT   <->  

   

002.03.004

C01   polypress:      C1       62 

MIDI
Note

Poly Pressure 

Value

Poly Pressure Screen

T

01  EVENT   <->  

   

003.02.026

C01   prog: 10       m:off    l:off 

Bank 

Number MSB 

cc:0

Program 

Change 

Number

Bank 

Number LSB 

cc:32

Program Change Screen

T

01   EVENT    <->  

   

002.03.008

C01   controller #1       v:52

Summary of Contents for MP-7 command station





































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands