manualshive.com logo in svg

E-Mu MP-7 command station, Owner'S Manual

Share
Download
E-Mu MP-7 command station Owner'S Manual Download Page 55

MP-7 Owners Manual   

43

Basic Operations

Touchstrip, Transpose, Keypads & Glide

Erase Button

When this button is latched on (LED illuminated) while recording a 
pattern, any note played on the keyboard will remove that note from the 
pattern as long as the keyboard key is held down. This allows you to 
quickly removed any “flubbed” notes without having to enter Pattern Edit 
mode.

In Grid record mode, pressing the Erase button while the cursor is on one of 
the grid locations, removes the note from that location.

In Song step record mode, pressing the Erase button erases the currently 
selected step from the song.

Repeat Button

When this button is latched on (LED illuminated) while recording or 
playing back a pattern, played notes will repeat at the current pattern 
quantize setting (page 55). You can get some great effects with this feature 
by simultaneously changing the volume or pitch as the sound repeats.

In Song step edit mode, the Repeat button functions as a “Pattern Insert” 
button. See page 105 for more information.

_

_

_

_

Using the Repeat button, 

even in play mode, causes the 
current pattern to be dirtied 
(asterisk showing). Although 
nothing is actually recorded in 
the current pattern, this could 
cause an unsaved pattern to be 
wiped out.

Summary of Contents for MP-7 command station





































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands