EN
4
From the Box to the Air
(No GPS Module)
2S 7.4V 280mAh 45C
Lithium Polymer Batter
y
Delta Ray One Aircraft
2S 7.4V Li-Po battery
charger (RTF Only)
Hook and
Loop Tape
Double
Sided tape
Transmitter
(RTF Only)
280 mAh 7.4V
Li-Po Battery
(RTF Only)
AA Alkaline
Batteries (4)
(RTF Only)
Included in the Box
AC power Supply (RTF Only)
Introduction- SAFE Technology out of the box
The E-fl ite
®
Delta Ray
®
One airplane is an exceptional trainer that’s a blast to fl y. At its heart is
groundbreaking SAFE™ (Sensor Assisted Flight Envelope) technology that makes RC fl ight incredibly
easy, even for the least experienced user. Its combination of spatial awareness provides fl ight envelope
protection which adds a degree of security never before available, while it’s smooth fl ight capability battles
windy conditions so that all you feel is control that’s crisp and responsive. Multiple levels of fl ight envelope
protection are provided that can be reduced or removed as your skills progress, yet can be changed at the
fl ip of a switch if needed to instantly return the model to level fl ight if you ever lose orientation.
Optional Upgrades
(not included)
SAFE+ GPS Module
FPV Camera w/5.8GHz vtx
When added, advanced SAFE+ features can keep
the aircraft within a given distance to the pilot
(Virtual Fence), can return the model to home at the
press of a button (Holding Pattern), can return home
automatically if the controller signal is lost (Failsafe),
and can land itself when commanded (AutoLand).
Adding the FPV camera shows information from
the aircraft in the video image with an On Screen
Display (OSD). With the GPS module and the FPV
camera, the GPS information provides additional
features for the On Screen Display.
1. Charge fl ight battery.
2. Set up your transmitter (BNF only).
3. Find a safe and open area.
4. Power on transmitter and install fl ight
battery in aircraft.
5. Place the aircraft into Experienced
mode (Mode switch position 2) for the
control direction test. Place the aircraft
on the ground facing away from you.
6. Perform Control Direction Test.
7. Place the aircraft into
Beginner Mode
(Mode switch position 0) for the SAFE
Control Direction Test and takeoff.
8. Perform SAFE Control Direction Test.
9. Plan fl ight for fl ying fi eld conditions.
10. Set a fl ight timer for 6 minutes.
11. Place the aircraft into
Beginner Mode
for launch.
12. Launch into the wind and have fun!
