EN
26
Optional SAFE+ GPS Upgrade
When you are ready to land or your fl ight timer has
signaled, press and hold the red HP/AL button on the
transmitter for 4 seconds.
The aircraft will instantly respond and begin a landing
approach in the direction set during initialization. The
aircraft will land near your initialization point/location
and come to a complete stop.
When AutoLand is activated, you can still control the
aircraft to avoid obstacles like trees or poles. The
aircraft will allow you to make corrections if you apply
aileron or elevator commands, and will momentarily
return throttle control to the throttle stick while the
elevator or aileron commands are being used. Once
clear of the obstacles just let go of the control sticks
and the AutoLand feature will take over and resume
the landing.
At any time you can abort a landing by pressing and
releasing the HP/AL button or by changing the fl ight
mode.
If you want to takeoff again after landing pull the
throttle to low position and then press the red HP/AL
button again to deactivate AutoLand, or change fl ight
modes.
IMPORTANT:
The AutoLand feature can not be
initiated when your aircraft is below an altitude
of approximately 10ft (3m).
NOTICE:
The AutoLand feature does not possess the
ability to avoid obstacles. Ensure that your fl ying
location is free of obstacles (trees, buildings, etc)
before you start fl ying.
6ft (2m) power is cut.
Approximately
30ft (9m)
AutoLand (AL)
Wind
Approximately
65ft (20m)
Press
and hold
for 4 sec.
Press and
Release to
abort.
