EN
31
Optional FPV Upgrade
RTF/BNF Basic
When the FPV camera and the GPS module are connected, the OSD takes advantage of the GPS data
available on the aircraft to deliver the pilot useful information on the video display. GPS adds Speed
and altitude, GPS status, distance to home and an arrow pointing home.
The OSD can be helpful during prefl ight setup because it will display the status of the GPS, showing
the pilot when the model has a suffi cient GPS lock and is ready to fl y.
Beginner
7.9V
0
ft
0:27
Initializing
MPH
0
Spektrum
AutoLand Spektrum
7.6V
52
ft
4:27
85 ft
Ready
MPH
18
Flight Controller Status
When powering on the airplane to fl y
with GPS, the OSD will display the
fl ight status in the lower left corner.
• When fi rst powered on, the OSD
will show
INITIALIZING
• When the aircraft is connected to
the RC controller and has a GPS
lock, the OSD will display
READY
• When the GPS is connected,
the aircraft will not respond to
transmitter commands until the
status changes to
READY,
unless
the GPS is turned off.
Callsign
On Screen Display with GPS
FPV features with the GPS module installed
Flight Mode
Speed*
Flight controller
status
Distance to
home
Direction
to home
Voltage
Altitude
Flight time
*Speed is calculated from GPS information,
therefore it is ground speed, not airspeed.
