EN
25
Optional SAFE+ GPS Upgrade
RTF/BNF Basic
Holding Pattern (HP)
Press
and
Release
If at anytime the aircraft seems too far away, press and
release the HP/AL (bind) button on the transmitter.
The aircraft will maneuver to an altitude of approxi-
mately 120 feet (36m) and begin to fl y a circular pat-
tern over the home location.
If Airfi eld Virtual Fence mode is active, the aircraft will fl y
to approximately 120 ft (36m) altitude and fl y a circular
pattern about 100 ft (30m) in front of the home location.
The aircraft fl ies fully autonomously when HP mode is
active. The transmitter sticks have no control.
NOTICE:
As a safety precaution, Holding Pattern
mode will not function when your aircraft is below
an altitude of approximately 10 ft (3m).
To deactivate HP mode and regain control, press and
release the HP/AL button again or change fl ight modes.
IMPORTANT
: When the HP feature is activated, the air-
craft should immediately respond to the command. If
the aircraft does not respond immediately, GPS signal
may have been lost. In this case, the aircraft will have
to be fl own back to the home location manually.
Holding Pattern Mode
Holding Pattern Mode,
Airfi eld Virtual Fence
Active
