B 26
7
EN standards
7.1
Continuous sound pressure level
m
The operator always must use ear protection. The emission value at the ear of the
driver varies depending on the materials used for paving and may even rise above 85
dB(A). If no ear protection devices are used, hearing can be impaired.
The noise emission level of the paver finisher was measured under free-field condi-
tions according to the EN 500-6 draft dated March 1997, and ISO 4872.
Sound pressure level at the operator’s position
(at the height of the head):
L
AF
= 83.6 dB(A)
Sound capacity level:
L
WA
= 104.0 dB(A)
Sound pressure level at the vehicle
7.2
Operating conditions during measurement
The diesel engine ran at maximum speed, conveyor at 40%, augers at 40%, tamper
and vibration at minimum 50% of their maximum speed.
7.3
Measuring point configuration
Hemispherical measuring surface with a radius of 10 m. The machine was at the cen-
tre. The measuring points had been assigned the following coordinates:
Measuring point
2
4
6
8
10
12
Sound pressure level L
AFeq
(dB(A))
70.4
69.8
70.6
71.1
68.6
68.6
Measuring points 2, 4, 6, 8
Measuring points 10, 12
Co-ordinates
X
Y
Z
X
Y
Z
±7
±7
1,5
- 2,7
+2.7
+6,5
-6.5
7.1
7.1
Summary of Contents for F1200C
