Dynapac F1200C, Operation & Maintenance Manual

Page: 148 / 296

D 30.12 16
Auger limit switches
The augers are controlled by sensors.
Mounting the sensors:
Fasten the sensors to the side shield
(1 sensor for each auger) in the provided
clamp bracket (1) on the holding
tube (2).
m
Always mount the sensors (3) to ensure
that they are not damaged on extending
and retracting the screed.
Align the ultrasound sensor (3) towards
the mixed materials in front of the auger.
The sound waves should impact on the
mixed materials at right angles.
Adjust the deactivation point with the de-
sired material height by regulating the
potentiometer (4).
Repeat these tasks everyday before
starting work.
A
Always keep the sensors free of impuri-
ties.
3
2
1
3
4