Dynapac F1200C, Operation & Maintenance Manual

Page: 266 / 296

F 8.12 6
Alternator (2)
Electrical system insulation monitoring
The function of the protective insulation monitoring measure must be checked every
day before starting work.
A
This check only checks the function of the insulation monitor, not whether an insula-
tion error has occurred on the heating sections or consumers.
- Start the paver finisher's drive engine.
- Switch heating system switch (1) to ON.
- Press test button (2).
- The control light integrated into the test button signals "insulation fault".
- Press reset button (3) for at least 3 sec. to delete the simulated fault.
- The control light goes out.
1
1
2
3