Dynapac F1200C, Operation & Maintenance Manual

Page: 280 / 296

F 11.12 4
2 Operating substance specifications
2.1 Notes on diesel fuel
f
Risk of explosion! Never mix diesel fuel with ethanol, petrol or alcohol!
m
Diesel fuel contaminated with water or dirt can cause serious damage to the fuel sys-
tem! Keep fuel and fuel system free of water and impurities!
m
Observe the instructions for fuel recommendations and the specification in the main-
tenance instructions of the engine manufacturer!
2.2 Drive engine TIER III (
o
) - fuel specification
Permissible diesel fuels
* Detailed information at:
http://www.deutz.com
2.3 Drive engine TIER IV (
o
) - fuel specification
m
Low-sulphur diesel fuel is prescribed for correct operation of the exhaust-gas treat-
ment system!
The maximum sulphur level must not exceed 15 ppm!
If low-sulphur diesel fuel is not used, the prescribed exhaust values cannot be met
and damage will be caused to the engine and to the exhaust-gas treatment system!
Permissible diesel fuels
Specifications
Diesel fuel as per
requirements of the
engine manufac-
turer *
Sulphur level max.
2000mg/kg
EN 590 ASTM D975
JIS K 2204
HFRR max. 460µm
de \Service\Betriebsstoffe und Additive\Kraftstoffe
en \Service\Operating Liquids and Additives\Fuels
Specifications
EN 590 ASTM D975 S15
JIS K 2204
HFRR max. 460µm