Dynapac F1000W T4f, Operation & Maintenance Manual

Page: 56 / 275

D 1.1 1
D 1.1 Operation
1 Safety regulations
Starting the engine, the traction drive, the conveyor, the auger, the screed or the lifting
devices can cause injuries or even the death of persons.
Make sure before starting any of these devices that no-one is working on, in or be-
neath the paver finisher or within its danger area!
- Do not start the engine or actuate any controls if this is expressly forbidden!
Unless otherwise specified, the controls may only be actuated when the engine is
running!
Never crawl into the auger tunnel or step into the hopper or onto the conveyor. Dan-
ger to life and limb!
- Always make sure during operation that no-one is endangered by the machine!
- Ensure that all protective covers and hoods are fitted and secured accordingly!
- When damage is detected, eliminate it immediately! Operation must not be contin-
ued when the machine is defective!
- Do not let any persons ride on the paver finisher or the screed!
- Remove obstacles from the road and the work area!
- Always try to choose a driver position which is opposite to the flow of traffic! Lock
the operating panel and the driver's seat.
- Maintain sufficient safety clearance from overhanging objects, other machines and
points of danger!
- Be careful when traveling on rough terrain to keep the paver finisher from slipping,
tipping or turning over.
Always maintain control of the machine; never try to use it beyond its capabilities!