Dynapac F1000W T4f, Operation & Maintenance Manual

Page: 159 / 275

D 3.0 2
Driver's seat
To avoid injury, the individual seat settings should be checked and adjusted before
starting the vehicle.
After the adjustments are set, check the seat to
ensure it does not move out of adjustment.
- Se at forward and back adjustment
(1): The seat can be moved forward or it can
be moved back. to adjust the seat, raise the
lever on the lower left side of the seat to re -
lease the lock. Once the seat is in the desired
position, release the lever and the seat will
lock into place
- Se at back rest adjustment (2): The
back rest can be adjusted to lean forward or
lean back. To adjust the back rest, turn the
knob on the lower front part of the seat. Turn the knob clockwise to lean the back rest forward;
turn the knob counter-clockwise to lean the back rest back.
- Armrest positions (3): The armrest can be lowered to support the arm or it can be raised to be
stowed out of the way.
Batteries
The batteries are located under the right hand
side (from operator platform) maintenance door,
There are two 12 V batteries to produce the 24 V
needed for the electrical system.
For servicing, see chapter F.
Follow the instructions when jump starting the paver. (see section D 4).
1
3
2
under the switch panel.
Batteries