Dynapac F1000W T4f, Operation & Maintenance Manual

Page: 194 / 275

E 01 3
2.3 Auger extension
Depending on the type of screed, the most diversified working widths can be reached.
Auger and screed extension must match. See the operating instructions for the ap-
propriate screed, chapter ”Set-up and modification”, especially:
– Screed extension chart,
– Auger extension chart.
To attain the desired working width, the respective screed extensions, side plates, au-
gers, tunnel plates or cut-off shoes must be mounted.
For widths of more than 11.5 ft. (3.5 m.), the auger should be fitted with extension
parts on both sides to improve material distribution and to reduce the wear.
The diesel engine must be switched off whenever work is performed on the auger as
there is a danger of being pulled into rotating parts. This could cause severe injury or
death!