Dynapac F1000W T4f, Operation & Maintenance Manual

Page: 115 / 275

D 2.0 16
Warnings Display
Appears due to faulty machine op-
eration.
- Line (1): Actual displayed Warn-
ing of (x) active Warnings. Code
number is displayed
- Scroll between the active warn-
ings by using buttons 2 or 3.
- Leave Warning display by using
button 1
Warning Codes
Situation Code Display Message
Propel Selector in Position 4, while joystick is stroked
backward
1
Counter Rotate: stroke joystick for-
ward
Propel Selector in Position 4, while joystick is in neutral
for long (e.g. more than 10 seconds)
2
Counter Rotate: stroke joystick for-
ward
Change Propel selector switch while machine in mov-
ing
3
Change propel selector when ma-
chine is stopped
Change Propel selector switch while joystick is not neu-
tral
4
Change propel selector when joy-
stick is in neutral
Joystick not in neutral when machine is powered up 5 Return Joystick to neutral
Brake is applied, try to stroke joystick 6 Release the brake before driving
Change console selector switch while machine in mov-
ing
7
Change active console when ma-
chine is stopped
Change console selector switch while joystick is not in
neutral
8
Change active console when joy-
stick is in neutral
Propel Selector in Position 4, Joystick is moved forward
with no steering command for more than 5 seconds
9
Slope detection beyond the allowable limit 11
Beyond allowable slope. Bring the
gear down.
If the Generator frequency goes beyond the allowable
limits
12
Generator is not within allowable
limit
High hydraulic oil temperature 15 HydOilTemp_ToHigh
Low hydraulic oil level 17 HydOilLevel_Low
LH conveyor ultrasonic sensor open/short
Open: 19
Short: 18
UltrasConvLH_Open,
UltrasConvLH_Short
RH conveyor ultrasonic sensor open/short
Open: 21
Short: 20
UltrasConvRH_Open,
UltrasConvRH_Short
LH auger ultrasonic sensor open/short
Open: 23
Short: 22
UltrasAugerLH_Open,
UltrasAugerLH_Short
1