22
CC 501/501C O501EN3
The articulation must be locked before you
lift the roller. Fold out the arm (1) and se-
cure it to the rear machine frame with the
cotter (2). Attach the lifting chains and
ensure that no parts will be crushed when
hoisting.
Check the weight of the machine by reading
the data punched on the hoisting plate.
Steel wires, chains, etc. must be dimensioned
in conformance with current regulations.
PARKING, cont’d.
Long-term parking
HOISTING
Locking the articulation joint
1
Releasing the articulation joint
2
Fig. 27 Left side of articulation
1. Articulation in interlocked mode
2. Locking pin
1
Fig. 28 Left side of articulation
1. Articulation lock in open mode
In the case of parking for longer than one
month, please refer to the “Engine inhibition”
chapter in engine manual and the “Long-term
storage” chapter in the roller maintenance
manual.
A suitable alternative to inhibition is to start the engine
once a month and run the roller for about half an hour
while operating all of the hydraulic functions, then
lubricate all of the nipples and fill the fuel tank. Remem-
ber to empty the water tank and the sprinkler system.
Fig. 26 Long-term parking
Keep well clear of the hoisted machine.
Ensure that hoisting hooks are securely
anchored.
Remember to restore the articulation interlock
to open mode before driving again.
Fig. 29 Lifting the roller
1. Hoisting plate
Weight: See data plate on the roller
1
Summary of Contents for CC 501
Page 2: ......
