24
CC 501/501C O501EN3
Disengage the drum brakes by unscrewing the four
hexagonal socket screws about 5 mm (0.2 in) and then
pulling out the motor adapter against the screw heads.
Chock the drums before doing any work
underneath the roller.
Turn the arm (2) on the bypass valve 90° to disengage
the hydrostatic brake, see fig. 30.
The roller can now be towed.
Always use a towbar for all towing opera-
tions.
Restore all items on completion of the towing operation.
TOWING, cont’d.
Fig. 33 Drum brake
5. Screw
Towing short distances
with engine not working
(no hand pump available)
Normal mode
Brake active
Towing mode
Brake disengaged
5
5
5 mm (0.2 in)
Summary of Contents for CC 501
Page 2: ......
