17
CC 501/501C O501EN3
OPERATION
Open the throttle (32) until engine speed is 2200 rpm on
the tachometer (19). Turn the control knob (32) to finely
adjust:
Counterclockwise = increase and clockwise = reduce.
Check that the steering is working by turning the steer-
ing wheel once to the left and once to the right, while
the roller is stationary. The steering should work
smoothly and without jerks or interruption.
Ensure that the area in front of and behind
the roller is clear.
For operation on asphalt, turn on the watering system
(30) for the drum (36) for the tires (Combi). Use the
AUT mode to save water.
The parking brake knob (11) is to be pulled out and the
lamp (10) out.
Carefully move the forward/reverse lever (24) in the
desired direction of travel. Speed increases as the
lever is moved farther from the neutral position.
Speed must always be regulated with the
forward/reverse lever and not by changing the
engine speed.
Push the emergency stop button to check for proper
operation.
Parking brake knob (11) while the roller is running
slowly forward or reverse.
The roller should then slow down and come to a stand-
still as the control lamp (10) lights.
The forward/reverse lever (24) must be restored to
neutral before operation can continue.
As you drive, check that the gauges show normal
readings and that the warning lamps do not light.
Max. temperature of hydraulic fluid (15): 85°C (185°F).
Max. coolant temperature (16), diesel engine: 100°C
(212°F).
11
10
15 16 19
7
Fig. 15a Instrument panel, left
7. Switch, main/dipped beam
10. Warning lamp, brake
11. Parking brake knob
15. Temperature gauge, hydraulic fluid
16. Temperature gauge, engine
19. Tachometer/Hourmeter
32. Rev control
32
Fig. 15b Instrument panel, right
24. Forward/Reverse lever
30. Watering MAN/AUT
36. Watering, tires
24
30 36
Summary of Contents for CC 501
Page 2: ......
